[popeofjabootee]

Hello everyone. Hope this is the right topic to post in.

I have tons of physical cards and want to print out the virtual ones and glue them to the physical cards. What's the best glue to use so that I don't end up with warped cards after drying?

Thanks for the help

[Armus]

Hello everyone. Hope this is the right topic to post in.

I have tons of physical cards and want to print out the virtual ones and glue them to the physical cards. What's the best glue to use so that I don't end up with warped cards after drying?

Thanks for the help

Glue stick works well.

[jjh]

I use Roll-On Permanent Glue Tape. Link below. On the card print, I go with three rolled dabs across the top, one in the middle, and two in the bottom corners.

I also Sharpie the print edges so that the print black transitions into the card border black nicely. i.e. you don't see a "white frame" around the card print.

https://www.staples.com/Staples-Roll-On ... uct_689269

[jadziadax8]

When I used to print sets and cut them out, I would do it on Avery full-page label paper.

[Klauser]

Glue stick works well.

I'm with Armus - glue sticks are inexpensive, easy to locate and relatively easy to clean any "over-glueing".