[Warrior50]

I have enter my deck into the deck builder and it will not show that I have built a dilemma pile for the achievement Command Decision. I have reviewed the list from the first 2 E set and I have all 60 dilemma's from that set. Don't understand why it will not show that I have what is needed for the achievement.

[jadziadax8]

I have enter my deck into the deck builder and it will not show that I have built a dilemma pile for the achievement Command Decision. I have reviewed the list from the first 2 E set and I have all 60 dilemma's from that set. Don't understand why it will not show that I have what is needed for the achievement.

Can you link to the deck?

[eberlems]

Triage in your latest deck is the starter reprint version.

[Warrior50]

Ok will try to link my deck.

With regard to triage, I am looking at an actual card #1C57.

[Warrior50]

https://www.trekcc.org/decklists/?mode= ... 508ee1d6f8

Here is the link for my deck

[Warrior50]

Ok, I have posted a link to the deck above. I have gone through the cards in the dilemma pile for the 10 time, and all the cards have a 1 (C,U,R, or S). If I have missed something or it is because the achievement say's play in a 2 E tournament with all the dilemma's from the first 2E set, OK.

But what I don't understand is why the system would say that the deck is eligible for that achievement. I think this achievement is one of the few dilemma achievement I have not done.

Please tell me what I did wrong with dilemma pile. Thanks

[Johannes Mette]

Triage in your latest deck is the starter reprint version.

@Warrior50

[Warrior50]

Ok I have changed the triage dilemma 4 times now between the two choices. How does the system determine if it is a reprint or a card. The one I have is a real card.

I am getting very frustrated with this, if the system has both cards with the same card number how do we tell which one is which. I can only try to enter what my cards say the tile is and it's set number.
Maybe all the reprints should have a different ID number instead of the same number as the card from that set.

[Warrior50]

I have gone in again and checked all the dilemmas for this set and change all the cards to what I hope are the cards from set 1 and not reprints now. As I have done this several times today, I am done. Please tell me if I still have reprints and how to fix it so I don't drive myself MAD.

This should not be this hard, Most of the cards in this dilemma pile are actual cards from the first set. There some of the cards that I had to print so that I would have the cards for this set.

[The Ninja Scot]

I have gone in again and checked all the dilemmas for this set and change all the cards to what I hope are the cards from set 1 and not reprints now. As I have done this several times today, I am done. Please tell me if I still have reprints and how to fix it so I don't drive myself MAD.

This should not be this hard, Most of the cards in this dilemma pile are actual cards from the first set. There some of the cards that I had to print so that I would have the cards for this set.

Here's how I've done it in the past -

In the deckbuilder, there's an expansion drop down. If you go down to Second Edition, it'll show you what the system is looking for from that set. Just add one of each from the set, save and double-check (if you see all 60 numbers, you should be fine.)

https://www.trekcc.org/decklists/?mode= ... ckID=49308 - I copied the deck just to make sure that this worked. If you want, you can copy the deck if that helps.

Michael

[eberlems]

https://www.trekcc.org/decklists/?mode= ... 508ee1d6f8

Here is the link for my deck

fixed

The basic deckbuilder doesn't have a selection by expansion and all the other options.

[Warrior50]

I want to thank the person who fixed my issue with the Dilemma pile that I was building for the Command decision achievement. Yes, I am only using the basic deck builder. Thanks again for the help.